Mini9の概要
ID #1002
dmesg情報
[ 0.000000] Linux version 2.6.24-19-lpia (root@macbook) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Nov 3 15:25:26 UTC 2008 (Unofficial)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6e2000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 1142MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7fa0
[ 0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 521936
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 521936
[ 0.000000] On node 0 totalpages: 521936
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2285 pages used for memmap
[ 0.000000] HighMem zone: 290275 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7F70 checksum 0
[ 0.000000] ACPI: RSDP 000F7F70, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 7F6DC059, 006C (r1 PTLTD XSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7F6E1D48, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 7F6DCF3E, 4D96 (r1 INTEL CALISTGA 6040000 INTL 20050624)
[ 0.000000] ACPI: FACS 7F6E2FC0, 0040
[ 0.000000] ACPI: APIC 7F6E1E3C, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 7F6E1EA4, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7F6E1EDC, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 7F6E1F18, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1)
[ 0.000000] ACPI: TMOR 7F6E1F4A, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: APIC 7F6E1F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7F6E1FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 7F6DC0C5, 04F6 (r2 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 7:12 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 7:12 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517859
[ 0.000000] Kernel command line: ro root=/dev/sda2 hpet=disabled quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.032 MHz processor.
[ 8.833385] Console: colour VGA+ 80x25
[ 8.833391] console [tty0] enabled
[ 8.833754] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 8.834539] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.007525] Memory: 2061400k/2087744k available (3046k kernel code, 25116k reserved, 1315k data, 296k init, 1170240k highmem)
[ 9.007540] virtual kernel memory layout:
[ 9.007542] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 9.007544] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.007546] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 9.007548] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 9.007551] .init : 0xc054b000 - 0xc0595000 ( 296 kB)
[ 9.007553] .data : 0xc03f9831 - 0xc05424bc (1315 kB)
[ 9.007555] .text : 0xc0100000 - 0xc03f9831 (3046 kB)
[ 9.007561] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 9.007631] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 9.087596] Calibrating delay using timer specific routine.. 3232.17 BogoMIPS (lpj=6464352)
[ 9.087644] Security Framework initialized
[ 9.087652] SELinux: Disabled at boot.
[ 9.087678] AppArmor: AppArmor initialized
[ 9.087684] Failure registering capabilities with primary security module.
[ 9.087699] Mount-cache hash table entries: 512
[ 9.087880] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001 00000000
[ 9.087896] monitor/mwait feature present.
[ 9.087899] using mwait in idle threads.
[ 9.087904] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 9.087908] CPU: L2 cache: 512K
[ 9.087913] CPU: Physical Processor ID: 0
[ 9.087916] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00003940 0040c39d 00000000 00000001 00000000
[ 9.087927] Intel machine check architecture supported.
[ 9.087933] Intel machine check reporting enabled on CPU#0.
[ 9.087940] Compat vDSO mapped to ffffe000.
[ 9.087956] Checking 'hlt' instruction... OK.
[ 9.104052] SMP alternatives: switching to UP code
[ 9.106251] Early unpacking initramfs... done
[ 9.303532] ACPI: Core revision 20070126
[ 9.303639] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 9.315091] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 9.315121] SMP alternatives: switching to SMP code
[ 9.315918] Booting processor 1/1 eip 3000
[ 9.326063] Initializing CPU#1
[ 9.403311] Calibrating delay using timer specific routine.. 3192.24 BogoMIPS (lpj=6384486)
[ 9.403324] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001 00000000
[ 9.403336] monitor/mwait feature present.
[ 9.403342] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 9.403347] CPU: L2 cache: 512K
[ 9.403351] CPU: Physical Processor ID: 0
[ 9.403355] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00003940 0040c39d 00000000 00000001 00000000
[ 9.403366] Intel machine check architecture supported.
[ 9.403372] Intel machine check reporting enabled on CPU#1.
[ 9.403614] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 9.403656] Total of 2 processors activated (6424.41 BogoMIPS).
[ 9.403861] ENABLING IO-APIC IRQs
[ 9.404083] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 9.551397] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 9.571404] Brought up 2 CPUs
[ 9.571446] CPU0 attaching sched-domain:
[ 9.571450] domain 0: span 03
[ 9.571454] groups: 01 02
[ 9.571460] domain 1: span 03
[ 9.571463] groups: 03
[ 9.571467] CPU1 attaching sched-domain:
[ 9.571470] domain 0: span 03
[ 9.571473] groups: 02 01
[ 9.571478] domain 1: span 03
[ 9.571481] groups: 03
[ 9.571868] net_namespace: 64 bytes
[ 9.571880] Booting paravirtualized kernel on bare hardware
[ 9.572835] Time: 3:32:16 Date: 02/06/09
[ 9.572926] NET: Registered protocol family 16
[ 9.573278] No dock devices found.
[ 9.573458] ACPI: bus type pci registered
[ 9.574283] PCI: PCI BIOS revision 3.00 entry at 0xfde5f, last bus=5
[ 9.574288] PCI: Using configuration type 1
[ 9.574301] Setting up standard PCI resources
[ 9.579167] ACPI: EC: Look up EC in DSDT
[ 9.581745] ACPI: BIOS _OSI(Linux) query ignored
[ 9.581750] ACPI: DMI System Vendor: Dell Inc.
[ 9.581754] ACPI: DMI Product Name: Inspiron 910
[ 9.581757] ACPI: DMI Product Version: A04
[ 9.581760] ACPI: DMI Board Name: CN0J14
[ 9.581763] ACPI: DMI BIOS Vendor: Dell Inc.
[ 9.581766] ACPI: DMI BIOS Date: 12/29/2008
[ 9.581769] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 9.581773] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 9.582577] ACPI: Interpreter enabled
[ 9.582583] ACPI: (supports S0 S3 S4 S5)
[ 9.582610] ACPI: Using IOAPIC for interrupt routing
[ 9.584300] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 9.688541] ACPI: Device [J380] status [0000000a]: functional but not present; setting present
[ 9.731997] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 9.732006] ACPI: EC: driver started in interrupt mode
[ 9.732093] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 9.733042] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 9.733049] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 9.734986] PCI: Transparent bridge - 0000:00:1e.0
[ 9.735053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 9.735619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 9.735864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 9.736091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 9.736342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 9.748585] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 9.748768] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 9.748945] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 9.749122] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 9.749300] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 9.749478] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 9.749655] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 9.749832] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 9.750084] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 9.750148] pnp: PnP ACPI init
[ 9.750162] ACPI: bus type pnp registered
[ 9.771326] pnp: PnP ACPI: found 11 devices
[ 9.771332] ACPI: ACPI bus type pnp unregistered
[ 9.771671] SCSI subsystem initialized
[ 9.771749] libata version 3.00 loaded.
[ 9.772062] usbcore: registered new interface driver usbfs
[ 9.772137] usbcore: registered new interface driver hub
[ 9.772220] usbcore: registered new device driver usb
[ 9.772847] PCI: Using ACPI for IRQ routing
[ 9.772856] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 9.850957] NET: Registered protocol family 8
[ 9.850961] NET: Registered protocol family 20
[ 9.851078] AppArmor: AppArmor Filesystem Enabled
[ 9.854936] Time: tsc clocksource has been installed.
[ 9.867012] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 9.867020] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 9.867025] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 9.867031] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 9.867037] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 9.867043] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 9.867048] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 9.867054] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 9.867073] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 9.867084] system 00:06: ioport range 0x680-0x69f has been reserved
[ 9.867089] system 00:06: ioport range 0x800-0x80f has been reserved
[ 9.867095] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 9.867100] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 9.867105] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 9.867111] system 00:06: ioport range 0xfe00-0xfe7f has been reserved
[ 9.867116] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 9.867125] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 9.867131] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 9.898047] PCI: Bridge: 0000:00:1c.0
[ 9.898052] IO window: disabled.
[ 9.898061] MEM window: f0100000-f01fffff
[ 9.898068] PREFETCH window: 88000000-880fffff
[ 9.898076] PCI: Bridge: 0000:00:1c.1
[ 9.898078] IO window: disabled.
[ 9.898086] MEM window: f0200000-f02fffff
[ 9.898092] PREFETCH window: disabled.
[ 9.898100] PCI: Bridge: 0000:00:1c.2
[ 9.898105] IO window: 2000-2fff
[ 9.898112] MEM window: 88100000-881fffff
[ 9.898119] PREFETCH window: f0600000-f06fffff
[ 9.898127] PCI: Bridge: 0000:00:1e.0
[ 9.898129] IO window: disabled.
[ 9.898137] MEM window: disabled.
[ 9.898142] PREFETCH window: disabled.
[ 9.898191] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 9.898202] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 9.898233] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[ 9.898242] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 9.898272] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 9.898281] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 9.898298] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 9.898321] NET: Registered protocol family 2
[ 9.935199] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 9.935660] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 9.936705] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 9.937261] TCP: Hash tables configured (established 131072 bind 65536)
[ 9.937269] TCP reno registered
[ 9.947332] checking if image is initramfs... it is
[ 10.330279] Freeing initrd memory: 2699k freed
[ 10.330581] Simple Boot Flag at 0x36 set to 0x80
[ 10.331826] audit: initializing netlink socket (disabled)
[ 10.331848] audit(1233891136.204:1): initialized
[ 10.332175] highmem bounce pool size: 64 pages
[ 10.335939] VFS: Disk quotas dquot_6.5.1
[ 10.336080] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.336970] io scheduler noop registered
[ 10.336975] io scheduler anticipatory registered
[ 10.336979] io scheduler deadline registered
[ 10.337700] io scheduler cfq registered (default)
[ 10.337720] Boot video device is 0000:00:02.0
[ 10.338013] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.338080] assign_interrupt_mode Found MSI capability
[ 10.338137] Allocate Port Service[0000:00:1c.0:pcie00]
[ 10.338204] Allocate Port Service[0000:00:1c.0:pcie02]
[ 10.338350] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 10.338415] assign_interrupt_mode Found MSI capability
[ 10.338469] Allocate Port Service[0000:00:1c.1:pcie00]
[ 10.338545] Allocate Port Service[0000:00:1c.1:pcie02]
[ 10.338689] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 10.338761] assign_interrupt_mode Found MSI capability
[ 10.338816] Allocate Port Service[0000:00:1c.2:pcie00]
[ 10.338883] Allocate Port Service[0000:00:1c.2:pcie02]
[ 10.345764] ACPI: AC Adapter [ACAD] (on-line)
[ 10.398470] Switched to high resolution mode on CPU 0
[ 10.398668] Switched to high resolution mode on CPU 1
[ 10.494534] ACPI: Battery Slot [BAT1] (battery present)
[ 10.494849] input: Power Button (FF) as /devices/virtual/input/input0
[ 10.494856] ACPI: Power Button (FF) [PWRF]
[ 10.494976] input: Lid Switch as /devices/virtual/input/input1
[ 10.495054] ACPI: Lid Switch [LID0]
[ 10.495168] input: Power Button (CM) as /devices/virtual/input/input2
[ 10.495175] ACPI: Power Button (CM) [PWRB]
[ 10.495295] input: Sleep Button (CM) as /devices/virtual/input/input3
[ 10.495302] ACPI: Sleep Button (CM) [SLPB]
[ 10.510845] ACPI: device:01 is registered as cooling_device0
[ 10.511233] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 10.511241] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.511948] ACPI: SSDT 7F6DCC25, 0245 (r2 PmRef Cpu0Ist 3000 INTL 20050624)
[ 10.512285] ACPI: SSDT 7F6DC5BB, 05E5 (r2 PmRef Cpu0Cst 3001 INTL 20050624)
[ 10.512990] Monitor-Mwait will be used to enter C-1 state
[ 10.512996] Monitor-Mwait will be used to enter C-2 state
[ 10.513000] Monitor-Mwait will be used to enter C-3 state
[ 10.513076] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 10.513160] ACPI: ACPI0007:00 is registered as cooling_device1
[ 10.513168] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 10.513649] ACPI: SSDT 7F6DCE6A, 00D4 (r2 PmRef Cpu1Ist 3000 INTL 20050624)
[ 10.513965] ACPI: SSDT 7F6DCBA0, 0085 (r2 PmRef Cpu1Cst 3000 INTL 20050624)
[ 10.514888] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 10.514974] ACPI: ACPI0007:01 is registered as cooling_device2
[ 10.514982] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 10.558778] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 10.563187] ACPI: Thermal Zone [TZ01] (43 C)
[ 10.684963] Real Time Clock Driver v1.12ac
[ 10.685315] hpet_acpi_add: no address or irqs in _CRS
[ 10.685344] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 10.687571] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 10.688149] loop: module loaded
[ 10.688236] Driver 'sd' needs updating - please use bus_type methods
[ 10.688299] Driver 'sr' needs updating - please use bus_type methods
[ 10.688495] ata_piix 0000:00:1f.1: version 2.12
[ 10.688528] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 10.688580] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 10.688710] scsi0 : ata_piix
[ 10.688852] scsi1 : ata_piix
[ 10.689767] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 10.689773] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 10.850560] ata1.00: ATA-6: STEC PATA 32GB, D5221-10, max UDMA/133
[ 10.850566] ata1.00: 60188688 sectors, multi 1: LBA
[ 10.858436] ata1.00: configured for UDMA/100
[ 10.858493] ata2: port disabled. ignoring.
[ 10.858710] scsi 0:0:0:0: Direct-Access ATA STEC PATA 32GB D522 PQ: 0 ANSI: 5
[ 10.858967] sd 0:0:0:0: [sda] 60188688 512-byte hardware sectors (30817 MB)
[ 10.858996] sd 0:0:0:0: [sda] Write Protect is off
[ 10.859003] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.859050] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.859143] sd 0:0:0:0: [sda] 60188688 512-byte hardware sectors (30817 MB)
[ 10.859171] sd 0:0:0:0: [sda] Write Protect is off
[ 10.859177] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.859225] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.859233] sda: sda1 sda2
[ 10.859842] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.859981] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.860404] USB Universal Host Controller Interface driver v3.0
[ 10.860512] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 10.860529] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 10.860536] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.860702] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 10.860744] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
[ 10.861074] usb usb1: configuration #1 chosen from 1 choice
[ 10.861158] hub 1-0:1.0: USB hub found
[ 10.861171] hub 1-0:1.0: 2 ports detected
[ 10.962007] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 10.962023] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 10.962030] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 10.962194] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 10.962234] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 10.962505] usb usb2: configuration #1 chosen from 1 choice
[ 10.962590] hub 2-0:1.0: USB hub found
[ 10.962601] hub 2-0:1.0: 2 ports detected
[ 11.065899] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 11.065913] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.065920] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.066077] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 11.066118] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 11.066407] usb usb3: configuration #1 chosen from 1 choice
[ 11.066493] hub 3-0:1.0: USB hub found
[ 11.066504] hub 3-0:1.0: 2 ports detected
[ 11.169795] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 11.169808] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 11.169815] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 11.169971] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 11.170015] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[ 11.170285] usb usb4: configuration #1 chosen from 1 choice
[ 11.170368] hub 4-0:1.0: USB hub found
[ 11.170380] hub 4-0:1.0: 2 ports detected
[ 11.273706] Initializing USB Mass Storage driver...
[ 11.273785] usbcore: registered new interface driver usb-storage
[ 11.273791] USB Mass Storage support registered.
[ 11.273864] usbcore: registered new interface driver libusual
[ 11.274097] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 11.320795] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.320806] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 11.321026] mice: PS/2 mouse device common for all mice
[ 11.393731] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.426514] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[ 11.474097] cpuidle: using governor ladder
[ 12.477009] cpuidle: using governor menu
[ 12.477077] sdhci: Secure Digital Host Controller Interface driver
[ 12.477083] sdhci: Copyright(c) Pierre Ossman
[ 12.477179] sdhci: SDHCI controller found at 0000:02:00.2 [197b:2381] (rev 0)
[ 12.477226] ACPI: PCI Interrupt 0000:02:00.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 12.477262] PCI: Setting latency timer of device 0000:02:00.2 to 64
[ 12.477395] mmc0: SDHCI at 0xf0100400 irq 17 DMA
[ 12.477813] ACPI: PCI Interrupt 0000:02:00.3[A] -> GSI 16 (level, low) -> IRQ 17
[ 12.477830] PCI: Setting latency timer of device 0000:02:00.3 to 64
[ 12.478215] usbcore: registered new interface driver hiddev
[ 12.478303] usbcore: registered new interface driver usbhid
[ 12.478311] /root/src/hardy-netbook/debian/build/custom-source-lpia/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 12.478492] NET: Registered protocol family 1
[ 12.478941] NET: Registered protocol family 10
[ 12.479356] lo: Disabled Privacy Extensions
[ 12.480064] NET: Registered protocol family 17
[ 12.480109] Using IPI No-Shortcut mode
[ 12.480361] Magic number: 13:217:512
[ 12.480714] Freeing unused kernel memory: 296k freed
[ 12.818537] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 12.818566] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 12.818576] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 12.818787] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 12.822750] ehci_hcd 0000:00:1d.7: debug port 1
[ 12.822768] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 12.822781] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0544000
[ 12.837048] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 12.837342] usb usb5: configuration #1 chosen from 1 choice
[ 12.837441] hub 5-0:1.0: USB hub found
[ 12.837455] hub 5-0:1.0: 8 ports detected
[ 13.013215] Registering unionfs 1.4
[ 13.013221] unionfs: debugging is not enabled
[ 13.022679] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 13.115480] fuse init (API version 7.9)
[ 13.487408] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 13.664395] usb 4-1: configuration #1 chosen from 1 choice
[ 14.390545] Clocksource tsc unstable (delta = -655992576 ns)
[ 14.395533] Time: acpi_pm clocksource has been installed.
[ 14.432591] kjournald starting. Commit interval 5 seconds
[ 14.432614] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.584399] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
[ 16.701023] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 16.859938] intel_rng: FWH not detected
[ 16.915749] iTCO_vendor_support: vendor-support=0
[ 16.936694] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 16.936829] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.936893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.952415] ieee80211_crypt: registered algorithm 'NULL'
[ 16.980711] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 16.980830] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 16.980902] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 16.982380] eth0: RTL8101e at 0xf8866000, 00:21:70:df:38:b5, XID 24a00000 IRQ 220
[ 17.077731] ieee80211_crypt: registered algorithm 'TKIP'
[ 17.145692] EXT3 FS on sda2, internal journal
[ 18.210690] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 18.210740] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 18.359926] Linux agpgart interface v0.102
[ 18.366972] agpgart: Detected an Intel 945GME Chipset.
[ 18.367807] agpgart: Detected 7932K stolen memory.
[ 18.388702] agpgart: AGP aperture is 256M @ 0xd0000000
[ 18.433030] [drm] Initialized drm 1.1.0 20060810
[ 20.770150] drm_psb: exports duplicate symbol drm_order (owned by drm)
[ 20.775014] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 20.775032] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 20.777388] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 35.730100] Bluetooth: Core ver 2.11
[ 35.731354] NET: Registered protocol family 31
[ 35.731362] Bluetooth: HCI device and connection manager initialized
[ 35.731371] Bluetooth: HCI socket layer initialized
[ 35.744981] Bluetooth: HCI USB driver ver 2.9
[ 35.747112] usbcore: registered new interface driver hci_usb
[ 35.879740] Bluetooth: L2CAP ver 2.9
[ 35.879750] Bluetooth: L2CAP socket layer initialized
[ 35.979674] Bluetooth: RFCOMM socket layer initialized
[ 35.979700] Bluetooth: RFCOMM TTY layer initialized
[ 35.979706] Bluetooth: RFCOMM ver 1.8
[ 36.245134] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 36.372900] Linux video capture interface: v2.00
[ 36.397930] usbcore: registered new interface driver uvcvideo
[ 36.397945] USB Video Class driver (v0.1.0)
[ 36.520543] r8169: eth0: link down
[ 36.522422] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.853460] ppdev: user-space parallel port driver
[ 37.164300] wl: module license 'unspecified' taints kernel.
[ 37.168627] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 37.168656] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 37.193308] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.27.9
[ 48.506985] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 56.435960] eth1: no IPv6 routers present
[ 77.291694] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 77.396207] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 80.665226] Syncing filesystems ... done.
[ 80.665272] PM: Preparing system for mem sleep
[ 80.665278] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 80.666178] Freezing remaining freezable tasks ... (elapsed 0.09 seconds) done.
[ 80.764289] PM: Entering mem sleep
[ 80.764294] Suspending console(s)
[ 80.764781] ACPI: PCI interrupt for device 0000:00:02.0 disabled
[ 81.004552] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 81.004758] sd 0:0:0:0: [sda] Stopping disk
[ 81.005255] ACPI handle has no context!
[ 81.006194] ACPI: PCI interrupt for device 0000:02:00.3 disabled
[ 81.006678] ACPI: PCI interrupt for device 0000:02:00.2 disabled
[ 81.007890] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 81.008040] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 81.023431] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 81.023485] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 81.023537] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 81.023589] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 81.024337] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 81.044259] Disabling non-boot CPUs ...
[ 81.044286] CPU0 attaching NULL sched-domain.
[ 81.044289] CPU1 attaching NULL sched-domain.
[ 81.157143] CPU 1 is now offline
[ 81.157149] SMP alternatives: switching to UP code
[ 81.158411] CPU0 attaching sched-domain:
[ 81.158417] domain 0: span 01
[ 81.158420] groups: 01
[ 81.158803] CPU1 is down
[ 0.635146] Intel machine check architecture supported.
[ 0.635156] Intel machine check reporting enabled on CPU#0.
[ 0.635166] Back to C!
[ 0.635729] Enabling non-boot CPUs ...
[ 0.635838] CPU0 attaching NULL sched-domain.
[ 0.645775] SMP alternatives: switching to SMP code
[ 0.646636] Booting processor 1/1 eip 3000
[ 0.656769] Initializing CPU#1
[ 0.737515] Calibrating delay using timer specific routine.. 3191.91 BogoMIPS (lpj=6383833)
[ 0.737528] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001 00000000
[ 0.737541] monitor/mwait feature present.
[ 0.737547] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.737552] CPU: L2 cache: 512K
[ 0.737556] CPU: Physical Processor ID: 0
[ 0.737560] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00003940 0040c39d 00000000 00000001 00000000
[ 0.737572] Intel machine check architecture supported.
[ 0.737579] Intel machine check reporting enabled on CPU#1.
[ 0.737820] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.737865] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.757855] Measured 14111578536 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.757860] Marking TSC unstable due to: check_tsc_sync_source failed.
[ 0.757914] CPU0 attaching sched-domain:
[ 0.757920] domain 0: span 03
[ 0.757923] groups: 01 02
[ 0.757928] domain 1: span 03
[ 0.757930] groups: 03
[ 0.757934] CPU1 attaching sched-domain:
[ 0.757937] domain 0: span 03
[ 0.757939] groups: 02 01
[ 0.757943] domain 1: span 03
[ 0.757946] groups: 03
[ 0.758556] CPU1 is up
[ 0.759958] Switched to high resolution mode on CPU 1
[ 0.782939] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
[ 0.804029] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[ 0.804076] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 0.804095] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.804155] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 1fff1, writing 88018801)
[ 0.804173] PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 200, writing 20200)
[ 0.804193] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407)
[ 0.804254] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.804303] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100007, writing 100407)
[ 0.804362] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.804396] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was fff0, writing 88108810)
[ 0.804410] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20002020, writing 2020)
[ 0.804438] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100007, writing 100407)
[ 0.804485] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.804497] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 0.804506] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.804563] usb usb1: root hub lost power or was reset
[ 0.804587] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.804595] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.804651] usb usb2: root hub lost power or was reset
[ 0.804672] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.804680] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.804736] usb usb3: root hub lost power or was reset
[ 0.804757] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 0.804765] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.804820] usb usb4: root hub lost power or was reset
[ 0.805026] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 0.805041] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.805195] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.805296] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
[ 0.805319] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.805333] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 0.805610] ata2: port disabled. ignoring.
[ 0.807123] ACPI: PCI Interrupt 0000:02:00.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 0.807145] PCI: Setting latency timer of device 0000:02:00.2 to 64
[ 0.811237] ACPI: PCI Interrupt 0000:02:00.3[A] -> GSI 16 (level, low) -> IRQ 17
[ 0.811260] PCI: Setting latency timer of device 0000:02:00.3 to 64
[ 0.811520] PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 10b)
[ 0.811600] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing f0200004)
[ 0.811615] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 10)
[ 0.811635] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100002)
[ 0.811838] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100007, writing 100003)
[ 0.812174] sd 0:0:0:0: [sda] Starting disk
[ 0.855889] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 0.855897] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 filtered out
[ 0.858140] ata1.00: configured for UDMA/100
[ 0.858370] sd 0:0:0:0: [sda] 60188688 512-byte hardware sectors (30817 MB)
[ 0.858458] sd 0:0:0:0: [sda] Write Protect is off
[ 0.858470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.858604] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.758053] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 1.759443] PM: Finishing wakeup.
[ 1.759447] Restarting tasks ... <6>usb 4-1: USB disconnect, address 2
[ 1.787941] done.
[ 2.279221] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 2.449453] usb 4-1: configuration #1 chosen from 1 choice
[ 2.903937] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 2.903969] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 2.931548] eth0: Broadcom BCM4315 802.11 Wireless Controller 5.10.27.9
[ 2.938025] udev: renamed network interface eth0 to eth1
[ 2.960202] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 2.963467] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.963554] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 2.968508] eth0: RTL8101e at 0xf88be000, 00:21:70:df:38:b5, XID 24a00000 IRQ 220
[ 3.617821] r8169: eth0: link down
[ 3.619341] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.315870] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 26.660754] eth1: no IPv6 routers present
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6e2000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 1142MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7fa0
[ 0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 521936
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 521936
[ 0.000000] On node 0 totalpages: 521936
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2285 pages used for memmap
[ 0.000000] HighMem zone: 290275 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7F70 checksum 0
[ 0.000000] ACPI: RSDP 000F7F70, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 7F6DC059, 006C (r1 PTLTD XSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7F6E1D48, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 7F6DCF3E, 4D96 (r1 INTEL CALISTGA 6040000 INTL 20050624)
[ 0.000000] ACPI: FACS 7F6E2FC0, 0040
[ 0.000000] ACPI: APIC 7F6E1E3C, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 7F6E1EA4, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7F6E1EDC, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 7F6E1F18, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1)
[ 0.000000] ACPI: TMOR 7F6E1F4A, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: APIC 7F6E1F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7F6E1FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 7F6DC0C5, 04F6 (r2 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 7:12 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 7:12 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517859
[ 0.000000] Kernel command line: ro root=/dev/sda2 hpet=disabled quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.032 MHz processor.
[ 8.833385] Console: colour VGA+ 80x25
[ 8.833391] console [tty0] enabled
[ 8.833754] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 8.834539] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.007525] Memory: 2061400k/2087744k available (3046k kernel code, 25116k reserved, 1315k data, 296k init, 1170240k highmem)
[ 9.007540] virtual kernel memory layout:
[ 9.007542] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 9.007544] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.007546] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 9.007548] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 9.007551] .init : 0xc054b000 - 0xc0595000 ( 296 kB)
[ 9.007553] .data : 0xc03f9831 - 0xc05424bc (1315 kB)
[ 9.007555] .text : 0xc0100000 - 0xc03f9831 (3046 kB)
[ 9.007561] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 9.007631] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 9.087596] Calibrating delay using timer specific routine.. 3232.17 BogoMIPS (lpj=6464352)
[ 9.087644] Security Framework initialized
[ 9.087652] SELinux: Disabled at boot.
[ 9.087678] AppArmor: AppArmor initialized
[ 9.087684] Failure registering capabilities with primary security module.
[ 9.087699] Mount-cache hash table entries: 512
[ 9.087880] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001 00000000
[ 9.087896] monitor/mwait feature present.
[ 9.087899] using mwait in idle threads.
[ 9.087904] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 9.087908] CPU: L2 cache: 512K
[ 9.087913] CPU: Physical Processor ID: 0
[ 9.087916] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00003940 0040c39d 00000000 00000001 00000000
[ 9.087927] Intel machine check architecture supported.
[ 9.087933] Intel machine check reporting enabled on CPU#0.
[ 9.087940] Compat vDSO mapped to ffffe000.
[ 9.087956] Checking 'hlt' instruction... OK.
[ 9.104052] SMP alternatives: switching to UP code
[ 9.106251] Early unpacking initramfs... done
[ 9.303532] ACPI: Core revision 20070126
[ 9.303639] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 9.315091] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 9.315121] SMP alternatives: switching to SMP code
[ 9.315918] Booting processor 1/1 eip 3000
[ 9.326063] Initializing CPU#1
[ 9.403311] Calibrating delay using timer specific routine.. 3192.24 BogoMIPS (lpj=6384486)
[ 9.403324] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001 00000000
[ 9.403336] monitor/mwait feature present.
[ 9.403342] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 9.403347] CPU: L2 cache: 512K
[ 9.403351] CPU: Physical Processor ID: 0
[ 9.403355] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00003940 0040c39d 00000000 00000001 00000000
[ 9.403366] Intel machine check architecture supported.
[ 9.403372] Intel machine check reporting enabled on CPU#1.
[ 9.403614] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 9.403656] Total of 2 processors activated (6424.41 BogoMIPS).
[ 9.403861] ENABLING IO-APIC IRQs
[ 9.404083] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 9.551397] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 9.571404] Brought up 2 CPUs
[ 9.571446] CPU0 attaching sched-domain:
[ 9.571450] domain 0: span 03
[ 9.571454] groups: 01 02
[ 9.571460] domain 1: span 03
[ 9.571463] groups: 03
[ 9.571467] CPU1 attaching sched-domain:
[ 9.571470] domain 0: span 03
[ 9.571473] groups: 02 01
[ 9.571478] domain 1: span 03
[ 9.571481] groups: 03
[ 9.571868] net_namespace: 64 bytes
[ 9.571880] Booting paravirtualized kernel on bare hardware
[ 9.572835] Time: 3:32:16 Date: 02/06/09
[ 9.572926] NET: Registered protocol family 16
[ 9.573278] No dock devices found.
[ 9.573458] ACPI: bus type pci registered
[ 9.574283] PCI: PCI BIOS revision 3.00 entry at 0xfde5f, last bus=5
[ 9.574288] PCI: Using configuration type 1
[ 9.574301] Setting up standard PCI resources
[ 9.579167] ACPI: EC: Look up EC in DSDT
[ 9.581745] ACPI: BIOS _OSI(Linux) query ignored
[ 9.581750] ACPI: DMI System Vendor: Dell Inc.
[ 9.581754] ACPI: DMI Product Name: Inspiron 910
[ 9.581757] ACPI: DMI Product Version: A04
[ 9.581760] ACPI: DMI Board Name: CN0J14
[ 9.581763] ACPI: DMI BIOS Vendor: Dell Inc.
[ 9.581766] ACPI: DMI BIOS Date: 12/29/2008
[ 9.581769] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 9.581773] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 9.582577] ACPI: Interpreter enabled
[ 9.582583] ACPI: (supports S0 S3 S4 S5)
[ 9.582610] ACPI: Using IOAPIC for interrupt routing
[ 9.584300] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 9.688541] ACPI: Device [J380] status [0000000a]: functional but not present; setting present
[ 9.731997] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 9.732006] ACPI: EC: driver started in interrupt mode
[ 9.732093] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 9.733042] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 9.733049] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 9.734986] PCI: Transparent bridge - 0000:00:1e.0
[ 9.735053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 9.735619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 9.735864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 9.736091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 9.736342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 9.748585] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 9.748768] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 9.748945] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 9.749122] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 9.749300] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 9.749478] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 9.749655] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 9.749832] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 9.750084] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 9.750148] pnp: PnP ACPI init
[ 9.750162] ACPI: bus type pnp registered
[ 9.771326] pnp: PnP ACPI: found 11 devices
[ 9.771332] ACPI: ACPI bus type pnp unregistered
[ 9.771671] SCSI subsystem initialized
[ 9.771749] libata version 3.00 loaded.
[ 9.772062] usbcore: registered new interface driver usbfs
[ 9.772137] usbcore: registered new interface driver hub
[ 9.772220] usbcore: registered new device driver usb
[ 9.772847] PCI: Using ACPI for IRQ routing
[ 9.772856] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 9.850957] NET: Registered protocol family 8
[ 9.850961] NET: Registered protocol family 20
[ 9.851078] AppArmor: AppArmor Filesystem Enabled
[ 9.854936] Time: tsc clocksource has been installed.
[ 9.867012] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 9.867020] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 9.867025] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 9.867031] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 9.867037] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 9.867043] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 9.867048] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 9.867054] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 9.867073] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 9.867084] system 00:06: ioport range 0x680-0x69f has been reserved
[ 9.867089] system 00:06: ioport range 0x800-0x80f has been reserved
[ 9.867095] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 9.867100] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 9.867105] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 9.867111] system 00:06: ioport range 0xfe00-0xfe7f has been reserved
[ 9.867116] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 9.867125] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 9.867131] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 9.898047] PCI: Bridge: 0000:00:1c.0
[ 9.898052] IO window: disabled.
[ 9.898061] MEM window: f0100000-f01fffff
[ 9.898068] PREFETCH window: 88000000-880fffff
[ 9.898076] PCI: Bridge: 0000:00:1c.1
[ 9.898078] IO window: disabled.
[ 9.898086] MEM window: f0200000-f02fffff
[ 9.898092] PREFETCH window: disabled.
[ 9.898100] PCI: Bridge: 0000:00:1c.2
[ 9.898105] IO window: 2000-2fff
[ 9.898112] MEM window: 88100000-881fffff
[ 9.898119] PREFETCH window: f0600000-f06fffff
[ 9.898127] PCI: Bridge: 0000:00:1e.0
[ 9.898129] IO window: disabled.
[ 9.898137] MEM window: disabled.
[ 9.898142] PREFETCH window: disabled.
[ 9.898191] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 9.898202] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 9.898233] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[ 9.898242] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 9.898272] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 9.898281] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 9.898298] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 9.898321] NET: Registered protocol family 2
[ 9.935199] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 9.935660] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 9.936705] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 9.937261] TCP: Hash tables configured (established 131072 bind 65536)
[ 9.937269] TCP reno registered
[ 9.947332] checking if image is initramfs... it is
[ 10.330279] Freeing initrd memory: 2699k freed
[ 10.330581] Simple Boot Flag at 0x36 set to 0x80
[ 10.331826] audit: initializing netlink socket (disabled)
[ 10.331848] audit(1233891136.204:1): initialized
[ 10.332175] highmem bounce pool size: 64 pages
[ 10.335939] VFS: Disk quotas dquot_6.5.1
[ 10.336080] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.336970] io scheduler noop registered
[ 10.336975] io scheduler anticipatory registered
[ 10.336979] io scheduler deadline registered
[ 10.337700] io scheduler cfq registered (default)
[ 10.337720] Boot video device is 0000:00:02.0
[ 10.338013] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.338080] assign_interrupt_mode Found MSI capability
[ 10.338137] Allocate Port Service[0000:00:1c.0:pcie00]
[ 10.338204] Allocate Port Service[0000:00:1c.0:pcie02]
[ 10.338350] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 10.338415] assign_interrupt_mode Found MSI capability
[ 10.338469] Allocate Port Service[0000:00:1c.1:pcie00]
[ 10.338545] Allocate Port Service[0000:00:1c.1:pcie02]
[ 10.338689] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 10.338761] assign_interrupt_mode Found MSI capability
[ 10.338816] Allocate Port Service[0000:00:1c.2:pcie00]
[ 10.338883] Allocate Port Service[0000:00:1c.2:pcie02]
[ 10.345764] ACPI: AC Adapter [ACAD] (on-line)
[ 10.398470] Switched to high resolution mode on CPU 0
[ 10.398668] Switched to high resolution mode on CPU 1
[ 10.494534] ACPI: Battery Slot [BAT1] (battery present)
[ 10.494849] input: Power Button (FF) as /devices/virtual/input/input0
[ 10.494856] ACPI: Power Button (FF) [PWRF]
[ 10.494976] input: Lid Switch as /devices/virtual/input/input1
[ 10.495054] ACPI: Lid Switch [LID0]
[ 10.495168] input: Power Button (CM) as /devices/virtual/input/input2
[ 10.495175] ACPI: Power Button (CM) [PWRB]
[ 10.495295] input: Sleep Button (CM) as /devices/virtual/input/input3
[ 10.495302] ACPI: Sleep Button (CM) [SLPB]
[ 10.510845] ACPI: device:01 is registered as cooling_device0
[ 10.511233] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 10.511241] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.511948] ACPI: SSDT 7F6DCC25, 0245 (r2 PmRef Cpu0Ist 3000 INTL 20050624)
[ 10.512285] ACPI: SSDT 7F6DC5BB, 05E5 (r2 PmRef Cpu0Cst 3001 INTL 20050624)
[ 10.512990] Monitor-Mwait will be used to enter C-1 state
[ 10.512996] Monitor-Mwait will be used to enter C-2 state
[ 10.513000] Monitor-Mwait will be used to enter C-3 state
[ 10.513076] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 10.513160] ACPI: ACPI0007:00 is registered as cooling_device1
[ 10.513168] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 10.513649] ACPI: SSDT 7F6DCE6A, 00D4 (r2 PmRef Cpu1Ist 3000 INTL 20050624)
[ 10.513965] ACPI: SSDT 7F6DCBA0, 0085 (r2 PmRef Cpu1Cst 3000 INTL 20050624)
[ 10.514888] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 10.514974] ACPI: ACPI0007:01 is registered as cooling_device2
[ 10.514982] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 10.558778] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 10.563187] ACPI: Thermal Zone [TZ01] (43 C)
[ 10.684963] Real Time Clock Driver v1.12ac
[ 10.685315] hpet_acpi_add: no address or irqs in _CRS
[ 10.685344] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 10.687571] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 10.688149] loop: module loaded
[ 10.688236] Driver 'sd' needs updating - please use bus_type methods
[ 10.688299] Driver 'sr' needs updating - please use bus_type methods
[ 10.688495] ata_piix 0000:00:1f.1: version 2.12
[ 10.688528] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 10.688580] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 10.688710] scsi0 : ata_piix
[ 10.688852] scsi1 : ata_piix
[ 10.689767] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 10.689773] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 10.850560] ata1.00: ATA-6: STEC PATA 32GB, D5221-10, max UDMA/133
[ 10.850566] ata1.00: 60188688 sectors, multi 1: LBA
[ 10.858436] ata1.00: configured for UDMA/100
[ 10.858493] ata2: port disabled. ignoring.
[ 10.858710] scsi 0:0:0:0: Direct-Access ATA STEC PATA 32GB D522 PQ: 0 ANSI: 5
[ 10.858967] sd 0:0:0:0: [sda] 60188688 512-byte hardware sectors (30817 MB)
[ 10.858996] sd 0:0:0:0: [sda] Write Protect is off
[ 10.859003] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.859050] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.859143] sd 0:0:0:0: [sda] 60188688 512-byte hardware sectors (30817 MB)
[ 10.859171] sd 0:0:0:0: [sda] Write Protect is off
[ 10.859177] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.859225] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.859233] sda: sda1 sda2
[ 10.859842] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.859981] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.860404] USB Universal Host Controller Interface driver v3.0
[ 10.860512] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 10.860529] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 10.860536] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.860702] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 10.860744] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
[ 10.861074] usb usb1: configuration #1 chosen from 1 choice
[ 10.861158] hub 1-0:1.0: USB hub found
[ 10.861171] hub 1-0:1.0: 2 ports detected
[ 10.962007] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 10.962023] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 10.962030] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 10.962194] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 10.962234] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 10.962505] usb usb2: configuration #1 chosen from 1 choice
[ 10.962590] hub 2-0:1.0: USB hub found
[ 10.962601] hub 2-0:1.0: 2 ports detected
[ 11.065899] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 11.065913] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.065920] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.066077] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 11.066118] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 11.066407] usb usb3: configuration #1 chosen from 1 choice
[ 11.066493] hub 3-0:1.0: USB hub found
[ 11.066504] hub 3-0:1.0: 2 ports detected
[ 11.169795] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 11.169808] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 11.169815] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 11.169971] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 11.170015] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[ 11.170285] usb usb4: configuration #1 chosen from 1 choice
[ 11.170368] hub 4-0:1.0: USB hub found
[ 11.170380] hub 4-0:1.0: 2 ports detected
[ 11.273706] Initializing USB Mass Storage driver...
[ 11.273785] usbcore: registered new interface driver usb-storage
[ 11.273791] USB Mass Storage support registered.
[ 11.273864] usbcore: registered new interface driver libusual
[ 11.274097] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 11.320795] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.320806] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 11.321026] mice: PS/2 mouse device common for all mice
[ 11.393731] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.426514] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[ 11.474097] cpuidle: using governor ladder
[ 12.477009] cpuidle: using governor menu
[ 12.477077] sdhci: Secure Digital Host Controller Interface driver
[ 12.477083] sdhci: Copyright(c) Pierre Ossman
[ 12.477179] sdhci: SDHCI controller found at 0000:02:00.2 [197b:2381] (rev 0)
[ 12.477226] ACPI: PCI Interrupt 0000:02:00.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 12.477262] PCI: Setting latency timer of device 0000:02:00.2 to 64
[ 12.477395] mmc0: SDHCI at 0xf0100400 irq 17 DMA
[ 12.477813] ACPI: PCI Interrupt 0000:02:00.3[A] -> GSI 16 (level, low) -> IRQ 17
[ 12.477830] PCI: Setting latency timer of device 0000:02:00.3 to 64
[ 12.478215] usbcore: registered new interface driver hiddev
[ 12.478303] usbcore: registered new interface driver usbhid
[ 12.478311] /root/src/hardy-netbook/debian/build/custom-source-lpia/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 12.478492] NET: Registered protocol family 1
[ 12.478941] NET: Registered protocol family 10
[ 12.479356] lo: Disabled Privacy Extensions
[ 12.480064] NET: Registered protocol family 17
[ 12.480109] Using IPI No-Shortcut mode
[ 12.480361] Magic number: 13:217:512
[ 12.480714] Freeing unused kernel memory: 296k freed
[ 12.818537] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 12.818566] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 12.818576] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 12.818787] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 12.822750] ehci_hcd 0000:00:1d.7: debug port 1
[ 12.822768] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 12.822781] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0544000
[ 12.837048] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 12.837342] usb usb5: configuration #1 chosen from 1 choice
[ 12.837441] hub 5-0:1.0: USB hub found
[ 12.837455] hub 5-0:1.0: 8 ports detected
[ 13.013215] Registering unionfs 1.4
[ 13.013221] unionfs: debugging is not enabled
[ 13.022679] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 13.115480] fuse init (API version 7.9)
[ 13.487408] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 13.664395] usb 4-1: configuration #1 chosen from 1 choice
[ 14.390545] Clocksource tsc unstable (delta = -655992576 ns)
[ 14.395533] Time: acpi_pm clocksource has been installed.
[ 14.432591] kjournald starting. Commit interval 5 seconds
[ 14.432614] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.584399] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
[ 16.701023] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 16.859938] intel_rng: FWH not detected
[ 16.915749] iTCO_vendor_support: vendor-support=0
[ 16.936694] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 16.936829] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.936893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.952415] ieee80211_crypt: registered algorithm 'NULL'
[ 16.980711] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 16.980830] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 16.980902] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 16.982380] eth0: RTL8101e at 0xf8866000, 00:21:70:df:38:b5, XID 24a00000 IRQ 220
[ 17.077731] ieee80211_crypt: registered algorithm 'TKIP'
[ 17.145692] EXT3 FS on sda2, internal journal
[ 18.210690] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 18.210740] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 18.359926] Linux agpgart interface v0.102
[ 18.366972] agpgart: Detected an Intel 945GME Chipset.
[ 18.367807] agpgart: Detected 7932K stolen memory.
[ 18.388702] agpgart: AGP aperture is 256M @ 0xd0000000
[ 18.433030] [drm] Initialized drm 1.1.0 20060810
[ 20.770150] drm_psb: exports duplicate symbol drm_order (owned by drm)
[ 20.775014] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 20.775032] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 20.777388] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 35.730100] Bluetooth: Core ver 2.11
[ 35.731354] NET: Registered protocol family 31
[ 35.731362] Bluetooth: HCI device and connection manager initialized
[ 35.731371] Bluetooth: HCI socket layer initialized
[ 35.744981] Bluetooth: HCI USB driver ver 2.9
[ 35.747112] usbcore: registered new interface driver hci_usb
[ 35.879740] Bluetooth: L2CAP ver 2.9
[ 35.879750] Bluetooth: L2CAP socket layer initialized
[ 35.979674] Bluetooth: RFCOMM socket layer initialized
[ 35.979700] Bluetooth: RFCOMM TTY layer initialized
[ 35.979706] Bluetooth: RFCOMM ver 1.8
[ 36.245134] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 36.372900] Linux video capture interface: v2.00
[ 36.397930] usbcore: registered new interface driver uvcvideo
[ 36.397945] USB Video Class driver (v0.1.0)
[ 36.520543] r8169: eth0: link down
[ 36.522422] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.853460] ppdev: user-space parallel port driver
[ 37.164300] wl: module license 'unspecified' taints kernel.
[ 37.168627] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 37.168656] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 37.193308] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.27.9
[ 48.506985] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 56.435960] eth1: no IPv6 routers present
[ 77.291694] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 77.396207] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 80.665226] Syncing filesystems ... done.
[ 80.665272] PM: Preparing system for mem sleep
[ 80.665278] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 80.666178] Freezing remaining freezable tasks ... (elapsed 0.09 seconds) done.
[ 80.764289] PM: Entering mem sleep
[ 80.764294] Suspending console(s)
[ 80.764781] ACPI: PCI interrupt for device 0000:00:02.0 disabled
[ 81.004552] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 81.004758] sd 0:0:0:0: [sda] Stopping disk
[ 81.005255] ACPI handle has no context!
[ 81.006194] ACPI: PCI interrupt for device 0000:02:00.3 disabled
[ 81.006678] ACPI: PCI interrupt for device 0000:02:00.2 disabled
[ 81.007890] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 81.008040] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 81.023431] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 81.023485] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 81.023537] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 81.023589] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 81.024337] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 81.044259] Disabling non-boot CPUs ...
[ 81.044286] CPU0 attaching NULL sched-domain.
[ 81.044289] CPU1 attaching NULL sched-domain.
[ 81.157143] CPU 1 is now offline
[ 81.157149] SMP alternatives: switching to UP code
[ 81.158411] CPU0 attaching sched-domain:
[ 81.158417] domain 0: span 01
[ 81.158420] groups: 01
[ 81.158803] CPU1 is down
[ 0.635146] Intel machine check architecture supported.
[ 0.635156] Intel machine check reporting enabled on CPU#0.
[ 0.635166] Back to C!
[ 0.635729] Enabling non-boot CPUs ...
[ 0.635838] CPU0 attaching NULL sched-domain.
[ 0.645775] SMP alternatives: switching to SMP code
[ 0.646636] Booting processor 1/1 eip 3000
[ 0.656769] Initializing CPU#1
[ 0.737515] Calibrating delay using timer specific routine.. 3191.91 BogoMIPS (lpj=6383833)
[ 0.737528] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001 00000000
[ 0.737541] monitor/mwait feature present.
[ 0.737547] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.737552] CPU: L2 cache: 512K
[ 0.737556] CPU: Physical Processor ID: 0
[ 0.737560] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00003940 0040c39d 00000000 00000001 00000000
[ 0.737572] Intel machine check architecture supported.
[ 0.737579] Intel machine check reporting enabled on CPU#1.
[ 0.737820] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.737865] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.757855] Measured 14111578536 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.757860] Marking TSC unstable due to: check_tsc_sync_source failed.
[ 0.757914] CPU0 attaching sched-domain:
[ 0.757920] domain 0: span 03
[ 0.757923] groups: 01 02
[ 0.757928] domain 1: span 03
[ 0.757930] groups: 03
[ 0.757934] CPU1 attaching sched-domain:
[ 0.757937] domain 0: span 03
[ 0.757939] groups: 02 01
[ 0.757943] domain 1: span 03
[ 0.757946] groups: 03
[ 0.758556] CPU1 is up
[ 0.759958] Switched to high resolution mode on CPU 1
[ 0.782939] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
[ 0.804029] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[ 0.804076] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 0.804095] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.804155] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 1fff1, writing 88018801)
[ 0.804173] PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 200, writing 20200)
[ 0.804193] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407)
[ 0.804254] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.804303] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100007, writing 100407)
[ 0.804362] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.804396] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was fff0, writing 88108810)
[ 0.804410] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20002020, writing 2020)
[ 0.804438] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100007, writing 100407)
[ 0.804485] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.804497] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 0.804506] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.804563] usb usb1: root hub lost power or was reset
[ 0.804587] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.804595] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.804651] usb usb2: root hub lost power or was reset
[ 0.804672] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.804680] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.804736] usb usb3: root hub lost power or was reset
[ 0.804757] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 0.804765] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.804820] usb usb4: root hub lost power or was reset
[ 0.805026] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 0.805041] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.805195] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.805296] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
[ 0.805319] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.805333] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 0.805610] ata2: port disabled. ignoring.
[ 0.807123] ACPI: PCI Interrupt 0000:02:00.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 0.807145] PCI: Setting latency timer of device 0000:02:00.2 to 64
[ 0.811237] ACPI: PCI Interrupt 0000:02:00.3[A] -> GSI 16 (level, low) -> IRQ 17
[ 0.811260] PCI: Setting latency timer of device 0000:02:00.3 to 64
[ 0.811520] PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 10b)
[ 0.811600] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing f0200004)
[ 0.811615] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 10)
[ 0.811635] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100002)
[ 0.811838] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100007, writing 100003)
[ 0.812174] sd 0:0:0:0: [sda] Starting disk
[ 0.855889] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 0.855897] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 filtered out
[ 0.858140] ata1.00: configured for UDMA/100
[ 0.858370] sd 0:0:0:0: [sda] 60188688 512-byte hardware sectors (30817 MB)
[ 0.858458] sd 0:0:0:0: [sda] Write Protect is off
[ 0.858470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.858604] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.758053] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 1.759443] PM: Finishing wakeup.
[ 1.759447] Restarting tasks ... <6>usb 4-1: USB disconnect, address 2
[ 1.787941] done.
[ 2.279221] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 2.449453] usb 4-1: configuration #1 chosen from 1 choice
[ 2.903937] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 2.903969] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 2.931548] eth0: Broadcom BCM4315 802.11 Wireless Controller 5.10.27.9
[ 2.938025] udev: renamed network interface eth0 to eth1
[ 2.960202] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 2.963467] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.963554] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 2.968508] eth0: RTL8101e at 0xf88be000, 00:21:70:df:38:b5, XID 24a00000 IRQ 220
[ 3.617821] r8169: eth0: link down
[ 3.619341] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.315870] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 26.660754] eth1: no IPv6 routers present
タグ: -
関連エントリ: -
